For STM32 MCU Micropython Programming Micropython pyBoard with Multiple Sensors

Description

Description
Kit For STM32 MCU Micropython Programming Micropython pyBoard with Multiple Sensors
Board For pyBoard:
It fits for pyBoard v1.1 and has improved some functions:
1. Rearranged buttons and LED make it user-friendly
2. Added XH-2.54 2P port for power supply input on the back side
3. Screen printing changed for better
V+: 3.6-6V input (It is recommended to use USB port to power. When it is powered via USB port, it is 5V.)
3V3: 3.3V output with maximum current 250mA.
VBAT: Power supply input. (On-board FET protection circuit. XH-2.54 2P port on the back side)
VBACK: Backup power supply input
A3V3: Analog reference voltage. Connect to 3V3
X9 / X10 is in I2C mode when using on-board three-axis accelerometer
X17: When you press USR button, X17 will connects to GND through 4.7k resistor
P2-P5 connect to 4 LEDs which will be lit when IO outputs high level.
SD_SW = A8 to check whether it is inserted to switch
MMA_INT = B2 is used to receive interrupts generated by the on-board accelerometer
MMA_AVDD = B5 pin connected to AVDD of on-board accelerometer
BOOT0 connects to 3V3, and it will enter into DFU mode after resetting
pyBase Introduction:
It is a base board which is specially designed for pyBoard. With rich on-board resources, pyBase is designed with interfaces for powerful compatibility.
The development kit for Micro-Python make it possible for more Micro-Python experiments. Detailed functions as pictured:
pyBase Functional Parameters:
- Interface For py-board: Fit for pyboard v1.1-CN and official pyboard v1.1
- 2.54mm Pin Header: Interfaces for pyboard
- Buttons: RST & USR Buttons
- Potentiometer: ADC input
- Passive Buzzer: DAC output
- Servo Interface: X1-X4. Connection to external isolated circuit is needed
- OLED Port: For 4P/ 0.96"/ I2C/ OLED displays
- 1.77" LCD Port: For 01 Studio 1.77" LCD display
- 2.4" LCD Port: For 0.1 Studio 2.4" LCD display
- Temperature Sensor: DS18B20
- Temperature Humidity Sensor: DHT11
- Sensor Port 1: 3P interface for external sensor
- Sensor Port 2: 3P interface for external sensor
- Communications Port: 4P interface for UART/ I2C devices
- Charging Circuit: Charge power supply (Red Light: Charging; Green Light: Charged)
Package Included:
- 1 x Board For pyBoard
- 1 x pyBase For Micro-Python
- 1 x 0.9" OLED
- 1 x Micro USB Cable
- 1 x 16G SD Card
-1 x Atmospheric Pressure Sensor
-1 x Water Level Sensor
-1 x Soil Humidity sensor
-1 x Ultrasonic Sensor
-1 x Human Infrared Sensor
-1 x Photosensitive Sensor
Note: Batteries are not included in the package.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.