ESP8266 ESP-01 12V 4 Channel WiFi Relay Module For IOT Phone APP Controller L2KE

Description

Product View
Product Description
1. Description:
The 12V ESP8266 two way WIFI relay module is based on ESP-01 as the WIFI module, with 8 bit MCU chip, and realizes the wireless control of the relay in the local area network by mobile APP through a simple configuration process.
2. Function and features:
1>. On-board high performance microprocessor STM8S103 and ESP-01 WIFI module
2>. The module has 2 modes of work
Mode 1: the mobile phone is applied directly on the WIFI module
Mode 2: the mobile phone and the WIFI module are applied to the router at the same time.
Additional function: it can also be used as a USB relay when the ESP-01 is pulled out.
3>.Transmission distance:
In an open environment, the maximum stable transmission distance is 100M when the mobile phone is mounted on the WiFi module.
4>. When the WiFi module and mobile phone are carried on the router at the same time, the transmission distance depends on the signal strength of the router.
5>. The use of Smartcongig technology in the mobile phone on the APP ESP-01 WiFi module to complete the account and password configuration, configured username and password memory function.
6>. On-board 12V, 10A/250V AC 10A/30V DC relay, which can be continuously pulled for 100 thousand times, has diode discharge protection, short response time.
7>. On-board mode selection and real time working status indicator.
8>. Reserved UART debug interface and STM8 SWIM program download interface.
9>. Board size: 57.4*29mm.
3. Operating instructions:
Prepare the following tools before use:
12V/1A power adapter and APP “ESP Touch--Demo”
Step 1:
the 12V/1A power adapter, the positive and negative poles of the power are connected to IN+ and IN- of the module respectively.
Step 2:
Android mobile terminal installation APP''Esp Touch--Dem ", for the first use of work mode 2 to ESP-01 module configuration WiFi account number and password.
Step 3:
Android mobile terminal to install APP "Easy TCP--20", TCP transmission tool, used to send relay control instructions. Click on "SWITCH", and then enter the relay control instructions and names and contents (instruction form HEX) by the gray blocks in the interface.
4. Instructions for use of two operating modes and additional function:
Operating mode 1 (the mobile phone is applied directly on the WIFI module) instructions:
1>. Plug in the ESP-01 module, the module power up. About 4 seconds later, the green light changed from extinction to 2 seconds flashing. Description configuration completed.
2>. AP hot spot signal sent by mobile phone connected to ESP--01 module.
3>. Opens "EasyTCP--20" APP, and clicks "CONNECT"". After the connection is successful, the green light flashes slowly from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.
Operating mode 2(the mobile phone and the WIFI module are applied to the router at the same time.) instructions:
1>. Plug in the ESP--01 module, the module power, the light green light into slow flash, then press the S1 button to switch to the mode 2. Blue light, about 1 minutes later into 0.5S flash, indicating waiting for "Esp Touch--Demo" "APP" for its configuration WiFi account and password.
2>. At this time, the phone line connected to the router. Open "Esp Touch- Demo" "APP", enter the router password, click "Confirm".
3>. Waits for configuration to succeed, when the APP interface appears ESP-01 IP (such as 192.168.0.189) address, indicating that the ESP--01 module successfully connected to the router, and automatically remember the account number and password. The next entry mode 2 will automatically connect (about 20-60S to connect).
It's important to note that the 192.168.0.189 IP address is dynamically assigned to the ESP-01 module by the router. The address may change after the next re-connection. You can see the real time IP address of the ESP-01 module in the router's device list.
4>. Opens "Easy TCP--20" APP, and clicks "CONNECT". When the connection is successful, the green light flashes from 2 seconds to normal. Click on the gray box to send instructions to control the switch of the relay.
Additional functions (as USB relay) instructions:
Prepare a USB to TTL serial module. The GND, TX, and RX of the TTL module are connected to the GND, TX, and RX of the relay module respectively. Pull out the ESP-01 module, select mode 1, and turn the green light into 2S slow flash and open the serial debug software on the computer (such as SSCOM32), and choose the baud rate of 115200. Sending A0 0101 A2 in the form of sixteen (HEX) can open the relay; send the A0 0100 A1 in the form of sixteen (HEX) to close the relay. Take the relay as an example:
5. Warm tips:
1>. For the first time using the configuration WIFI password time would be a little bit longer (about 1 minutes). After the completion of the next boot up configuration requires only 20 seconds can be automatically connected.
2>. If you want to replace the router, power outages can restart or press the S2 button (press the S2 key will remove the previous memory WIFI account and password). Under Mode 2 to configure ESP--01 WiFi account and password.
3>. The router signal when the ESP--01 memory is weak or does not lead to connection interruption in the service area, the green light will be extinguished and try to connect automatically. The key in this process to the invalid state. When the green light for 2 seconds and slowly restore the connection that has flashing.
4>. Mode 1 and mode 2 only when the green light for 2 seconds and slowly flashing or steady button can be used for the rest of the chip, self configuration or wait for the configuration process. The key is invalid.
5>. ESP--01 and ESP--01 have no timeout mechanism, mobile phone data from more than 6 minutes will automatically disconnect TCP. Then click on the "EasyTCP--20" APP in the upper right corner of the "CONNECT" to re-establish a connection.
6. Package list:
1* 12V single path WiFi relay module
Shipping :
1)All items will be shipped to your
paypal address
.Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address.
2)Most of the items will be shipped via
Hongkong Airmail/Singapore Airmail
.To US customers,we will send the package via
E-packet
.
3)All items will be shipped in
1-2 business days
(excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.
4)Tax:We will do our best to help you to clear the goods,and the tax depends on each country custom.
5)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.
6)The product in our store is free shipping. But the shipping method is different based on your order.If your order is
more than
,we will send the items to you with
tracking number
for free.If your order is less than ,the registered mail fee is on your side.
We could also deliver your item via EMS,DHL or Fedex based on your requirement.
Payment :
We Only Accept Paypal on Ebay. For specific requirements, please feel free to contact
us.
Return Policy
Shipping Informations
Payment
About us
Return Policy
WE PROMISE YOU CAN GET THE ITEMS YOU PAID OR REFUND.
To USA: Send by e-package.
To other countries: Order more than , provide free tracking number. Order less than ,customer can pay to get a tracking number.
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
Shipping Informations
We provide airmail service with good package . The items will be shipped within the nest
2 business days after we received the payment . when you buy multiple items ,your shipping
cost will be combined with discount.
Country
DELIVERY TIME
Shipping time will be longer than below period due to the flight and holiday
WORKING DAYS
5-7
8-10
12-14
15-19
20-22
WORKINGDAYS+SATURDAY+SUNDAY
5-9
8-15
16-20
21-25
26-30
Australia
Rate(time arrived)
21.4%
52.1%
14.3%
7.2%
4%
United States
Rate(time arrived)
5.2%
80%
14.3%
0.5%
United Kingdom
Rate(time arrived)
9.9%
63.2%
19.1%
3.4%
4.4%
Germany
Rate(time arrived)
11.1%
22.2%
30.3%
20.9%
15.5%
Canada
Rate(time arrived)
2%
45.1%
31.4%
17.6%
4%
Italy
,Russia
Rate(time arrived)
2.5%
10.2
18.2%
17.3%
31.3%
Spain
Rate(time arrived)
3.5%
25%
47.9%
12.9%
10.7%
Brazil
, most of     the south America country
Rate(time arrived)
Most package will need 4-8 weeks
Other country
Rate(time arrived)
0.5%
8.6%
15.0%
43.8%
28.1%
Payment
We accept Paypal.
Please leave note for your special request ( such as color, size, package... ) when you pay the order.
About us
We located in the biggest electronic market in China--HQB(Shenzhen) ,Specialist in ICs over 10 years, we seek to establish long-term business relationships.
Real store with large stock ICs, 100% as describe.
Best price, Good quality. Can get almost everything at the lowest price *HIT ALL PRICE,14 days NO-QUESTION- RETURN
go to my store