-40%

EPDM 25' Seam Kit: 25SEAM

$ 39.6

Availability: 20 in stock
  • Condition: New
  • Water Type: Fresh
  • Material: Rubber
  • Set Includes: Fixing Tape
  • Manufacturer: Anjon Manufacturing
  • Suitable For: Fountain & Water Features
  • Brand: Anjon
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: United States
  • Lining Material: Rubber
  • Type: Liner Repair Kit
  • MPN: 25SEAM
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    25’ Seam Kit
    Do You Need to Seam Two Pieces of Liner Together?
    Do You Need to Know How to Seam Them Together? If so, We Have the Kit and the Instructions for You.
    This Kit Includes the Following Items:
    1.
    3” x 25’ Double Sided Seam Tape
    2.
    One Pint of EPDM Primer Activator
    3.
    (1) 3” Paint Brush
    4.
    (1) Seam Roller
    5.
    (1) 10oz Tube of Black Lap Caulk
    How To Make Perfect Liner Seams:
    Step #1
    Layout the Liner
    Layout the sections of liner to be seamed on the flattest surface available. Overlap ends 6” – 12”
    Step #2
    Clean the Seam Area
    Lift the top liner. Use gasoline & thoroughly clean the seam area
    Step #3
    Mark the Seam Area
    With the top liner down, use a crayon or lightly score with scissors, the seam area on the bottom liner. Raise the top liner in preparation for priming.
    Step #4
    Prime the Seam Area
    Prime both liners. On the bottom liner, prime an area ¼” above the mark, approximately 6” – 8” wide. Prime a matching area on the top liner.  Allow primer to semi-dry to tacky upon touch.  It will not seam correctly if primed areas are wet.
    Step #5
    Apply 3” Double Stick
    Apply 3” double sided tape to the bottom liner, pressure rolling as you go to eliminate air bubbles or wrinkles.
    Step #6
    Smooth the Seam
    With the double stick paper still on, replace the top liner and pressure roll the seam.
    Step #7
    Seal the Seam
    Slit the double stick tape in the center. Overlap the liners & carefully remove the paper, pulling off the tape from between the liners at a 45º angle, one side at a time.
    Step #8
    Roll and Seal Forever
    Thoroughly pressure-roll the seam and generously apply lap sealant along the edge of the seam.
    Step #9
    Allow the Seam to Dry
    Allow the seam to dry thoroughly before contact with water.
    If you need help or have questions, please message us through eBay, email us or call.
    Important Shipping Information
    1.
    Warehouse pickup not available
    2.
    FedEx Ground or Home Delivery for packages under 150 pounds
    3.
    Freight rates based on standard delivery service; expedited delivery available for an additional charge
    4.
    Upon delivery, please inspect your item carefully for any evidence of shipping damage
    5.
    If any damage is found please call us immediately or refuse delivery if not
    sure.
    Never sign for something as “OK” you think may be damaged.
    Once a damaged product
    is signed for, the responsibility for a freight claim shifts to you—the customer—instead of US
    the shipper.
    6.
    We do not ship to Canada, AK, HI, PR or Internationally
    Ships To
    ·
    Delivered price to continental US only
    ·
    We do not ship to Canada, AK, HI, PR or Internationally
    About Pond Depot
    We ha
    ve been in business of satisfying water garden, pond and Koi enthusiasts for almost 20 years. We look forward to helping you from start to finish on building your pond or water feature. If you are not sure about something please email us; we're here to help you find the right products you want and to give you the advice you need to successfully complete your project. You can reach us by calling, emailing or messaging us through EBay.
    Please keep in mind when emailing to allow ample time for us to answer. Also when ordering please allow plenty of time as our shipping times are good estimates, but we cannot always control shipping situations.
    When items ship we will send a computer generated email with tracking info. Items normally leave the warehouse with in one to two business days after payment is made.
    Questions?
    Message Us Through EBay
    The Pond Depot Team